⚡ SAME DAY · 7 DAYS/WEEK🔧 85% FIXED FIRST VISIT⭐ VERIFIED 5-STAR SERVICE📜 LICENSED & INSURED · BHGS #A49573🏆 BBB Accredited🏢 8 BRANCHES · LA · OC · VENTURA · SB · RIVERSIDE🤖 FREE AI DIAGNOSTIC — instant repair estimate
Book Online
🤖
Not sure what's wrong with your appliance? Get a free AI-powered diagnosis in 60 seconds — no obligation.
Free Diagnostic →

Price List · Los Angeles · 2026

Range Repair Cost in Los Angeles

Labor rates for gas and electric ranges — burner ignition, surface elements, oven failures, control boards. Parts quoted separately. The most common call — burner ignition — is often cheaper than people expect.

✆ (424) 325-0520 Book Online
BHGS #A49573 · BBB Accredited Business · 90-Day Warranty
Typical Labor Range
$160–$400
standard brands · labor only
Diagnostic fee$89
Applied to repairYes
PartsQuoted separately
Gas safety checkIncluded
Warranty90 days
Wolf / Viking / Thermador$280–$680+
All prices are labor only. Parts quoted separately after diagnosis.
🎍 BHGS #A49573
🔥 Gas & Electric · Dual-Fuel
⚡ Same Day Service
📋 Quote Before We Start
🛡 90-Day Warranty

How Our Pricing Works

The most common range call — one burner won’t light — is often a $160–$220 job

Gas range ignition failures are the single most common range repair call in Los Angeles. A burner that clicks but won’t light, or won’t ignite after a boilover, is almost always an igniter or spark electrode issue — not a gas valve or control board problem. The repair is straightforward. Flat-rate pricing that assumes the worst-case component costs you more than you should pay.

We diagnose first. The $89 fee covers the full diagnosis. Once we know which component failed — igniter, electrode, valve, element, board — we give you two numbers: labor and the specific OEM part. You approve before we start. A boilover that knocked out one burner igniter is a very different repair from a control board failure — and the price should reflect that.

Gas range calls include supply pressure verification and a post-repair gas leak check at no extra charge. Any work involving gas components requires confirming safe operation before we leave. This is not an add-on fee — it’s standard on every gas range call.

🔥 Gas ranges

Surface igniters, spark electrodes, gas valves, safety valves. Most LA range calls are gas ignition. We confirm supply pressure and all burners before leaving.

⚡ Electric ranges

Surface heating elements, infinite switches, control boards. Element failures are straightforward. Infinite switch failures cause uncontrolled heating — replace immediately.

🔥⚡ Dual-fuel

Gas surface + electric oven. Wolf, Viking, Thermador, Bertazzoni. Both gas and electric systems in one unit. More complex to diagnose correctly — our techs know these configurations.

Flat-Rate BlueBook pricing

  • Single price before diagnosis
  • Labor and parts bundled
  • One-burner repair priced like full replacement
  • Gas safety check as add-on fee
  • You don’t know what the part costs

Our approach — labor + parts separate

  • Diagnose first, then quote
  • One igniter vs. control board — different prices
  • Gas pressure check and leak test included
  • Boilover-related ignition often no part needed
  • $89 diagnostic applied to the total

Labor Rates by Repair Type — Los Angeles 2026

What range repair labor costs in Los Angeles

All prices are labor only. Parts quoted separately after diagnosis. $89 diagnostic applied to repair total when you approve the work.

Repair TypeLabor RangeWhat’s Typically Involved
Gas burner won’t ignite MOST COMMON
One or more surface burners won’t light, clicking continuously
$160–$320
+ igniter or electrode if needed
 Spark igniter replacement, spark electrode, spark module. Boilover moisture often resolves with drying — no part needed. We check all burners while on site.
Gas burner flame uneven / won’t stay lit GAS
Flame too low, flickering, or goes out immediately
$175–$360
+ valve or cap if needed
 Burner cap misalignment (often free), gas valve adjustment, burner orifice cleaning, thermocouple (standing pilot models)
Electric surface element not heating
One or more burners dead on electric range
$160–$320
+ element or switch
 Surface heating element replacement, infinite switch (controls heat level). We test all elements while on site.
Infinite switch failure
Burner won’t turn off, uncontrolled heat, or won’t turn on
$175–$340
+ infinite switch
 Infinite switch replacement. A switch stuck in “on” is a fire hazard — we treat this as a priority repair.
Oven not heating / wrong temperature
Range oven not working while surface burners are fine
$175–$400
+ bake element or igniter
 Oven bake element (electric), oven igniter (gas), temperature sensor, oven control board. Same range as standalone oven repair.
Control board / display failure
Display dead, error codes, erratic behavior
$250–$520
+ board (expensive on some brands)
 Main control board or user interface board. Diagnosis confirms board vs. wiring or sensor issue before ordering.
Range top / grates damaged
Cracked glass cooktop, damaged grates, surface cosmetic repair
$150–$320
+ glass or grates (can be expensive)
 Glass cooktop replacement, cast iron grate replacement. We quote glass cooktop cost before proceeding — replacement glass is sometimes close to replacement range value.
Spark ignition clicking constantly GAS
All burners clicking continuously even when off
$160–$300
+ igniter switch if needed
 Igniter switch failure or moisture in ignition module from boilover. Often resolves with drying. Switch replacement if failed.
Wolf / Viking / Thermador LUXURY
All failure types, gas, electric, dual-fuel
$280–$680+
+ OEM parts (premium pricing)
 Proprietary high-BTU gas components, dual-fuel configurations, custom sealed burners, professional-grade control modules
Bertazzoni / ILVE / Lacanche LUXURY
European professional ranges, all failure types
$280–$640+
+ OEM parts (import lead times possible)
 Italian and European professional-grade ranges. Parts sometimes have 1–3 week lead times from European distribution. We advise on availability before confirming repair.
Diagnostic fee
Service call + full diagnosis · gas includes pressure check
$89
Applied to repair
 Applied to labor total when you approve the repair. Gas calls include supply pressure check and post-repair leak test.

All prices are labor only. Parts quoted separately. Gas safety checks included on every gas range call. Quote before we start; invoice matches the quote. 90-day warranty on parts and labor.

Cost Factors

What affects range repair cost in Los Angeles

🔥

Gas vs. electric vs. dual-fuel

Gas ignition is the most common failure and usually the least expensive. Electric ranges have simpler surface issues but more complex control boards. Dual-fuel configurations require knowledge of both systems — reflected in the higher luxury range labor.

💧

Boilover damage

LA kitchens see a lot of boilover-caused ignition failures. Liquid in the ignition module shorts the spark circuit. This often resolves with drying at no parts cost. Flat-rate pricing assumes a part is needed before checking.

🏷

Brand and configuration

Standard brands (GE, Samsung, LG, Whirlpool) have widely available OEM igniters and elements. Wolf, Viking, Bertazzoni use proprietary gas components. European ranges may have import lead times — we advise upfront.

🏗

Slide-in vs. freestanding

Slide-in ranges sit flush with the counter and require more care to remove for access. Some repairs take longer on slide-ins — reflected in the quote before we start.

🔥

Glass cooktop damage

A cracked glass cooktop is a parts cost that can approach the value of the range itself. We quote the glass cost before recommending repair vs. replacement. Transparent in the separate parts quote.

📌

Root cause, not just symptom

A burner that won’t light might be a wet igniter, a failed electrode, or a bad spark module. We find which one before ordering parts. With separate labor and parts, you see exactly what the diagnosis found.

Repair vs. Replace

When to repair a range, when to replace it

We give you an honest assessment after diagnosis — the same one we’d give if it were our own range.

Repair makes sense when:

  • Unit is under 12 years old
  • Total repair (labor + parts) is under 50% of replacement
  • Luxury range (Wolf, Viking, Bertazzoni) — these last 15–20 years
  • Slide-in model in custom cabinetry — replacement is disruptive
  • Single component failure (igniter, element, switch)
  • Burner ignition issue — often very low total cost

Replace makes more sense when:

  • Budget range is 12–15+ years old
  • Control board cost exceeds 60% of replacement value
  • Glass cooktop crack where glass cost approaches range value
  • Multiple components failing simultaneously
  • Parts discontinued with no reliable ETA

Real Cost Examples

What recent range repairs actually cost in LA

Labor and parts shown as separate line items — exactly how we quote it.

Koreatown
"Two burners won’t light after boilover"

Samsung gas range — boilover soaked two igniter modules. Dried thoroughly, cleaned burner caps, tested all burners. Both ignited. No part needed.

Labor (cleaning + dry out)$175
PartsNone
Diagnostic (applied)−$89
Total paid$86
Encino
"Viking range front burner igniter dead — gas smell when trying"

Viking 36" gas range — front left igniter failed. Gas releasing without ignition. Replaced OEM Viking igniter, confirmed all burners lighting cleanly, leak test passed.

Labor$340
OEM Viking igniter$165
Diagnostic (applied)−$89
Total paid$416
Glendale
"Electric range burner won’t turn off — stuck on high"

GE electric range — infinite switch failure on front right element. Fire hazard — replaced switch same day. Confirmed all settings cycling correctly.

Labor$220
OEM infinite switch$55
Diagnostic (applied)−$89
Total paid$186
Studio City
"Spark clicking on all burners constantly — won’t stop"

Whirlpool gas range — ignition module shorted from boilover moisture in the control panel. Module replaced. Confirmed all burners igniting and clicking stopped at rest.

Labor$240
OEM ignition module$75
Diagnostic (applied)−$89
Total paid$226

FAQ

Questions about range repair costs in Los Angeles

How much does range repair cost in Los Angeles?
Labor typically runs $160–$400 for standard brands. Burner ignition issues — the most common call — run $160–$320 and often require no replacement part. Parts are quoted separately after diagnosis. Wolf and Viking luxury ranges run $280–$680+ in labor.
One burner won’t ignite. How much to fix?
A single gas burner not igniting is typically an igniter or spark electrode issue. Labor runs $160–$320 for standard brands. If a boilover caused it, the igniter module may just need drying — no parts cost. We check all burners while on site and confirm gas safety before leaving.
How much does Wolf or Viking range repair cost?
Labor for Wolf and Viking range repair runs $280–$680+ depending on the failure. These professional ranges use proprietary high-BTU gas components and dual-fuel configurations. OEM parts are premium-priced and quoted separately after diagnosis.
Why do you quote labor and parts separately?
Many LA repair companies use flat-rate BlueBook pricing. A boilover that just needs drying should not cost the same as replacing an ignition module. We quote separately so the price reflects your actual repair — and burner ignition calls are frequently much cheaper than people expect.
Are parts included in the quoted labor price?
No — all prices on this page are labor only. After diagnosis we quote the specific part needed as a separate line item. Gas range calls include supply pressure verification and post-repair leak test at no extra charge. OEM parts used wherever available.
What is the $89 diagnostic fee?
We charge $89 to come out and diagnose the problem. That fee applies to the repair total when you approve the work. If you decide not to repair, you pay $89 and we leave.
What warranty do you provide on range repair?
90 days on parts and labor. Same issue within 90 days — we come back at no charge. OEM parts wherever available.

Related Cost Guides

Other appliance repair cost guides

Oven Repair Cost Stove Repair Cost Cooktop Repair Cost Refrigerator Repair Cost Dishwasher Repair Cost Wall Oven Repair Cost Oven Repair Service Appliance Repair Los Angeles

Range not working?

$89 diagnostic, same day available across Los Angeles. Gas and electric. Burner ignition calls are often cheaper than you think — labor and parts quoted separately.

✆ Call (424) 325-0520 Book Online