⚡ SAME DAY · 7 DAYS/WEEK 🔧 85% FIXED FIRST VISIT ⭐ VERIFIED 5-STAR SERVICE 📜 LICENSED & INSURED · BHGS #A49573 🏆 BBB A+ 🏢 8 BRANCHES · LA · OC · VENTURA · SB · RIVERSIDE

Price List · Los Angeles · 2026

Microwave Repair Cost in Los Angeles

Labor rates for countertop, over-the-range, and built-in microwaves. Parts quoted separately. Over-the-range and built-in units are almost always worth repairing — replacement requires installation work.

BHGS #A49573 · BBB A+ Accredited · 90-Day Warranty
Typical Labor Range
$100–$360
by type · labor only
Diagnostic fee$89
Countertop$100–$280
Over-the-range$150–$360
Built-in / drawer$180–$380
Miele / Bosch built-in$250–$480+
Warranty90 days
All prices are labor only. Parts quoted separately after diagnosis.
🎍 BHGS #A49573
⚡ Countertop · OTR · Built-in
⚠️ High-Voltage Certified
📋 Quote Before We Start
🛡 90-Day Warranty

How Our Pricing Works

Countertop, over-the-range, built-in — three very different repair economics

Microwave repair economics depend heavily on the type of installation. A basic countertop microwave under $150 is often not worth repairing — a magnetron replacement can exceed the unit’s value. But an over-the-range microwave above a range or a built-in unit integrated into cabinetry is a completely different calculation. Replacing those requires removing the old unit, purchasing a compatible replacement, and paying for installation — typically $400–$800+ total. Repair almost always wins on those units.

We diagnose first. The $89 fee covers the full diagnosis including a high-voltage safety assessment. After diagnosis you get two numbers: labor and the specific OEM part. For countertop microwaves, we’ll tell you honestly if repair doesn’t make economic sense before proceeding.

⚠ High-voltage safety — do not attempt DIY

Microwave ovens contain high-voltage capacitors rated at 2,100V or more that can hold a lethal charge even after the unit is unplugged. Magnetron, capacitor, and diode repairs require proper capacitor discharge procedures before any internal work. Our technicians are trained specifically in high-voltage microwave safety. Do not open a microwave interior beyond the glass door panel.

🔣 Countertop

Freestanding units. Simple repairs (door latch, fuse, turntable) are cost-effective. Magnetron and control board replacements may not be worth it on budget units. We advise honestly after diagnosis.

🏠 Over-the-range (OTR)

Mounted above range, serves as range hood. Almost always worth repairing — replacement requires a technician visit anyway. Add labor for dismounting the unit if needed for internal access.

🏛️ Built-in / drawer

Integrated into cabinetry or as a drawer unit. Replacement requires cabinetry work and custom trim kits. Repair is almost always the better option. Higher labor for built-in access.

Labor Rates by Repair Type — Los Angeles 2026

What microwave repair labor costs in Los Angeles

All prices are labor only. Parts quoted separately after diagnosis. $89 diagnostic applied to repair total when you approve the work.

Repair TypeLabor RangeWhat’s Typically Involved
Not heating / no power to heat
Microwave runs but food doesn’t heat
$150–$320
+ magnetron or diode
Magnetron failure (most expensive part), high-voltage diode, high-voltage capacitor. Requires capacitor discharge before diagnosis. Parts quoted separately.
Magnetron failure HIGH VOLTAGE
Complete loss of heating, arcing, burning smell
$180–$360
+ magnetron (expensive)
Magnetron replacement — the primary heating component. High-voltage component requiring full capacitor discharge and safety procedure. We advise on repair vs. replace economics for countertop units before ordering.
Door not closing / latch failure
Door won’t latch, unit won’t start, door bouncing open
$100–$220
+ latch assembly
Door latch assembly, door switches (safety interlock). Most common microwave repair — straightforward on all unit types.
Completely dead / no power
No display, no response, nothing when plugged in
$100–$240
+ fuse or board if needed
Ceramic fuse (most common, inexpensive), line fuse, thermal cutoff, main control board. Fuse replacements are quick; board replacements require repair vs. replace assessment on countertop units.
Sparking / arcing inside
Visible sparks, burning smell, scorch marks on interior
$120–$260
+ waveguide cover or paint
Waveguide cover replacement or cleaning (grease buildup causing arcing), mica plate replacement, interior cavity assessment. Do not continue using a sparking microwave.
Turntable not rotating
Plate doesn’t spin during operation
$100–$200
+ motor or coupling
Turntable motor, coupling or drive bushing, turntable ring and roller assembly. Often the simplest microwave repair.
Display failure / control panel unresponsive
Blank display, buttons not responding, error codes
$150–$300
+ control board
Control board, touchpad membrane, display board. On premium brands the control board alone can be expensive — quoted separately after diagnosis.
Light bulb / interior light out
Interior light not working during operation
$100–$160
+ bulb or socket
Light bulb, socket, wiring. Simplest microwave repair. On OTR units, light may also serve as cooktop illumination.
Over-the-range fan / vent not working OTR
Exhaust fan not running, venting not working
$150–$300
+ fan motor or switch
Exhaust fan motor, fan switch, grease filter assessment. OTR-specific — the range hood function of the unit.
Over-the-range mounting / installation OTR
Unit loose, mounting bracket failed
$150–$280
+ hardware if needed
Mounting bracket repair, wall anchor assessment. Includes full remount and confirmation of secure installation.
Miele / Bosch / Sharp built-in LUXURY
Built-in and drawer microwave repairs
$250–$480+
+ OEM parts
European-sourced OEM components, integrated trim kit systems, drawer mechanism repairs. Higher labor for built-in cabinetry access.
Diagnostic fee
Service call + full diagnosis · high-voltage safety assessment
$89
Applied to repair
Applied to labor total when you approve. Includes high-voltage capacitor discharge and safety assessment before internal diagnosis.

All prices are labor only. Parts quoted separately. For countertop microwaves, we advise on repair vs. replace economics before ordering any parts. Quote before we start; invoice matches the quote. 90-day warranty on parts and labor.

Cost Factors

What affects microwave repair cost in Los Angeles

🔣

Countertop: repair vs. replace math

Budget countertop microwaves ($100–$200) often don’t make economic sense to repair when the magnetron or control board fails. We tell you this before ordering parts. Door latch, fuse, and turntable repairs on any unit usually make sense.

🏠

OTR and built-in: almost always repair

An over-the-range or built-in microwave replacement requires professional installation and typically costs $400–$800+ including the unit, trim kit, and labor. Repair is almost always the better financial choice on these units.

⚠️

High-voltage components

Magnetron, capacitor, and diode failures require a trained technician with proper discharge procedure. This is not a DIY repair. The labor reflects the safety requirements — not just the time to install the part.

🏷

Brand and OEM part cost

Generic magnetrons exist but OEM parts are preferred for longevity and fit. Miele, Bosch, and Sharp built-in units use proprietary components at premium pricing — quoted separately so you see the real cost.

🔧

Installation access

Countertop microwaves are easy to access. OTR units require working overhead and may need dismounting. Built-in drawer units require removing the drawer mechanism. Labor reflects actual access complexity.

📌

Arcing — stop using immediately

A microwave that sparks or arcs internally should not be used until repaired. Continued use can damage the magnetron and cavity beyond economic repair. Arcing is usually a waveguide cover issue — inexpensive to fix if caught early.

Repair vs. Replace

When to repair a microwave, when to replace it

The answer depends almost entirely on whether it’s countertop or built-in. We give you the honest math after diagnosis.

Repair makes sense when:

  • Over-the-range unit — replacement requires installation
  • Built-in or drawer unit — replacement requires cabinetry work
  • Any unit with door latch, fuse, or turntable failure
  • Countertop unit worth over $300 with minor failure
  • Miele / Bosch built-in — these last 15+ years
  • Arcing from waveguide cover — inexpensive fix

Replace makes more sense when:

  • Budget countertop unit under $150 with magnetron failure
  • Control board cost exceeds unit replacement value
  • Interior cavity physically damaged from arcing
  • Unit over 10 years old with major component failure
  • Parts discontinued with no OEM availability

Real Cost Examples

What recent microwave repairs actually cost in LA

Labor and parts shown as separate line items — exactly how we quote it.

Brentwood
"Built-in Miele microwave completely dead — no display"

Miele built-in unit — ceramic fuse blown from a power surge. Discharged capacitor, replaced fuse, confirmed full operation. Simple fix on an expensive unit.

Labor$260
OEM fuse$18
Diagnostic (applied)−$89
Total paid$189
West Hollywood
"OTR microwave sparking — scared to use it"

LG over-the-range — waveguide cover coated in grease buildup causing arcing. Cleaned interior, replaced mica waveguide cover. No heating component failure.

Labor$180
Waveguide cover$15
Diagnostic (applied)−$89
Total paid$106
Pasadena
"Microwave door won’t stay closed — keeps popping open"

Samsung countertop microwave — door latch assembly failed. Replaced latch kit including door switches. Confirmed safe interlock operation.

Labor$150
OEM door latch kit$45
Diagnostic (applied)−$89
Total paid$106
Sherman Oaks
"OTR microwave runs but no heat — turntable spinning"

Whirlpool OTR — high-voltage diode failure. Discharged capacitor safely, replaced diode. Heating restored. Advised on keeping waveguide cover clean to prevent arcing.

Labor$240
OEM HV diode$28
Diagnostic (applied)−$89
Total paid$179

FAQ

Questions about microwave repair costs in Los Angeles

How much does microwave repair cost in Los Angeles?
Labor runs $100–$360 depending on the type and failure. Over-the-range and built-in microwaves run higher due to installation access. Parts are quoted separately. The $89 diagnostic fee applies to the repair total when you approve the work.
Is it worth repairing a countertop microwave?
It depends on the failure. Door latch, fuse, and turntable repairs on any countertop unit are usually worth it. Magnetron and control board replacements on budget countertop units (under $150) often are not — repair cost can exceed unit value. We tell you the honest math before ordering parts.
Are microwaves safe to repair?
A trained technician can repair microwaves safely. The danger is the high-voltage capacitor inside — it holds a lethal charge even when unplugged. Any repair beyond the door panel should be done by a technician with proper capacitor discharge procedures. Do not open the internal cavity yourself.
My microwave is sparking. Is that dangerous?
Yes — stop using it immediately. Sparking is usually caused by grease buildup on the waveguide cover, which is an inexpensive fix if caught early. Continued use damages the magnetron and interior cavity, turning a $100 repair into a much more expensive problem.
How much does over-the-range microwave repair cost?
Labor for OTR microwave repair runs $150–$360 depending on the failure. OTR units are almost always worth repairing because replacement requires a technician visit and installation regardless. Parts are quoted separately after diagnosis.
What is the $89 diagnostic fee?
We charge $89 to come out and diagnose the problem, including a high-voltage safety assessment. That fee applies to the repair total when you approve the work. If you decide not to repair, you pay $89 and we leave.
What warranty do you provide on microwave repair?
90 days on parts and labor. Same issue within 90 days — we come back at no charge. OEM parts wherever available.

Microwave not working?

$89 diagnostic, same day available across Los Angeles. Countertop, over-the-range, built-in. High-voltage repairs handled safely by trained technicians.