Our job photoSeptember 2026
Mecnosud IM44AD ice machine
ProblemThe ice machine had stopped working.
What we didOur technician traced the fault to the wire harness and repaired it on site — no parts needed.
✓ Repaired

Restaurants · Bars · Hotels · Same-Day Ice Machine Repair
Commercial ice machine and ice maker repair across LA — Hoshizaki, Manitowoc, Scotsman, Ice-O-Matic. Cube, flake, nugget, dispensers. EPA 608 + R-290 certified. Phones answered 24/7, no emergency surcharge. (424) 325-0520
AI Diagnostic · free · about a minute
Not sure what's wrong?
Describe it in your own words — get the likely causes and a repair cost range before you book.
10 service territories across Southern California
What is your ice machine doing?
By brand: Hoshizaki · Manitowoc · Scotsman · Ice-O-Matic · Follett. Home fridge or undercounter ice maker? See residential ice maker repair.
Ice machine service
Commercial ice machine and ice maker repair is our lane across LA — from Downtown LA, Hollywood, and Beverly Hills to Santa Monica, Long Beach, Culver City, and Pasadena. When a machine quits in a working kitchen, three causes account for most of the calls our techs at Same Day Appliance Repair run: scale buildup on the evaporator (about half of "no ice" calls resolve with a cleaning, not parts, because LADWP hard water insulates the plate and slows the freeze); a worn water inlet valve; and a refrigerant leak that needs EPA 608 repair before recharge. We diagnose the actual cause before quoting parts, then roll same-day, restaurant walk-in bars, hotel banquet kitchens, hospital and school cafeterias, sports and stadium concessions. Typical work runs $200-$300 for a cleaning service, $80-$180 for a water filter, $260-$420 for a water inlet valve, $700-$1,500 for an EPA 608 leak repair and recharge, and $1,500-$3,000 for an evaporator that hard-water scale destroyed, the exact failure cleaning prevents. Commercial diagnostic is $120, waived with the repair, no emergency surcharge, EPA 608 Universal certified (#1346255700410), R-290 certified for post-2020 hydrocarbon machines.
A bar runs out of ice at 9 PM Friday. A restaurant ice machine produces brown ice on Monday morning. A hospital ice dispenser stops at 3 AM. Commercial ice machine failure has cascading consequences: lost service, lost revenue, occasionally lost inventory, often lost customers. When LA operators search commercial ice machine repair near me, they need a human on the phone and the earliest open slot, not a callback queue.
Our techs service commercial ice machines across Los Angeles, Orange, Ventura, Santa Barbara, San Bernardino, Riverside, and San Diego counties, with same-day dispatch into DTLA, Beverly Hills, West Hollywood, Hollywood, Santa Monica, Pasadena, Long Beach, and Culver City restaurants and hotels. Cube (Manitowoc Indigo NXT, Hoshizaki KM-Edge, Scotsman Prodigy ELITE), flake (Hoshizaki F-Series for produce displays, seafood, medical use), nugget (Sonic-style chewable ice from Scotsman, Hoshizaki, Manitowoc), and self-serve dispensers (Cornelius, Hoshizaki, Manitowoc, Follett for hospitality and healthcare).
EPA 608 Universal certification covers every refrigerant we encounter: R-22 legacy, R-134a, R-404A, R-290 hydrocarbon. Hoshizaki, Manitowoc, and Scotsman are all transitioning to R-290 post-2020 for environmental compliance. We have R-290 certification.
BHGS #A49573. Phones answered 24/7 because ice machine emergencies happen at the worst times, especially Friday night bar service in West Hollywood or Monday morning hospital cafeteria in Pasadena.
We also do scheduled cleaning service, the preventive maintenance that most operators neglect and most appliance shops won't touch. Commercial ice machines require 2 to 4 cleanings per year. Without it, scale destroys evaporators, bacteria/yeast/mold build, ice production drops 20 to 40%. We do cleaning right. Parent context: commercial refrigeration repair.
What we service
See our complete commercial ice machine brand directory — 5 brands we service with full diagnostic pricing and parts availability per brand.
Most common commercial ice type. Used in bars, restaurants, hotels, cafés, beverage operations. Production capacity ranges from 200 lb/day (small undercounter) to 1,800+ lb/day (large modular machines on bins). Three top brands cover roughly 85% of cube machines in LA:
Common cube ice failures: scale on evaporator (cleaning resolves), water inlet valve, harvest sensor, hot gas valve (harvest cycle), control board diagnostic codes. See cube ice machine repair for category-specific details.
Used for: produce display (grocery, restaurants), seafood display (fishmongers, sushi bars), healthcare (medical ice), some beverage applications. Hoshizaki F-Series dominates this market: F-450MAH, F-801MWH and similar.
Architecture is fundamentally different from cube ice. Water freezes inside a cylindrical evaporator drum, an auger inside the drum scrapes ice off as it forms, mechanical scraping breaks ice into snow-like flakes, and the auger drives ice up to discharge into the bin.
Critical service items unique to flake: auger motor and gear reducer (heavy mechanical load, 6 to 9 year service life typical), drive shaft seals (wear at 5 to 7 years, water leakage if neglected), evaporator drum surface (eventually wears, replacement is a major repair). See flake ice machine repair.
"Sonic-style" chewable ice: soft, hollow nuggets. Hospitality favorite. Common in hospitals, premium fast-casual restaurants, beverage programs. Produced via a mechanism similar to flake (auger-driven inside the evaporator drum) but compressed and extruded into nugget shape before discharge.
Top brands: Scotsman Brilliance series, Hoshizaki F-Series nugget variants, Manitowoc R-Series. Common nugget failures: auger motor, gear reducer, extrusion mechanism, water inlet valve, scale buildup affecting freeze efficiency. See nugget ice machine repair.
Counter-mounted ice and water dispensers. Common in hospitality (hotel hallway dispensers), healthcare (cafeteria, patient floors), self-serve fountains. Brands: Cornelius (PepsiCo), Hoshizaki dispensers, Manitowoc dispensers, Follett. Common dispenser failures: dispenser actuator (vend mechanism), vend solenoid valve, water inlet valve, ice agitation motor (keeps ice from clumping in the bin). See dispenser repair.
Cleaning service
Commercial ice machines require regular cleaning to maintain ice production efficiency, prevent health code violations, and extend equipment life. 2 to 4 cleanings per year is industry standard, more for high-volume operations or hard water areas.
Why cleaning matters:
Mineral scale. Calcium and magnesium in water builds on evaporator plates. Scale insulates the evaporator, ice freezes slower, production drops 20 to 40%, and eventually the evaporator fails entirely. Replacement evaporator runs $1,500 to $3,000. Regular cleaning runs $200 to $300.
Bacterial / yeast / mold growth. Ice machines are warm, wet, dark environments perfect for microbial growth. Health inspectors take swab samples. Bacterial growth means health code violations. Yeast and mold cause ice taste and odor problems.
Slime in water lines. Biological film forms in water inlet lines. Causes water inlet valve failures and harvest cycle issues.
Standard SDAR cleaning procedure:
Pricing: $200 to $300 per cleaning. Multi-machine accounts get volume rates. Annual maintenance contracts reduce per-cleaning cost. Many appliance shops won't do this (time-consuming, customers undervalue preventive vs reactive). We do it routinely because it prevents 60% of "no ice" emergency calls. See scheduled cleaning service for scheduling and contracts.
Common scenarios
Across the ice machines our techs service in LA, the calls cluster in a consistent order. "Running but no ice or low production" is the number-one call, and roughly half of those resolve with a cleaning rather than a part, the scale-on-evaporator failure most non-specialist shops misdiagnose as a $2,400 compressor. Discolored or bad-tasting ice from an expired filter or biological growth is next, then ice frozen to the evaporator (a harvest-cycle fault). Bin-sensor and drain issues, constant-run refrigerant or condenser problems, and flake/nugget auger wear follow. Dispenser vend-actuator faults and water-cooled-to-air-cooled conversions round out the tail. We diagnose the cause before quoting the part.
In rough order of how often we get called:
Real repairs
Five ice machine jobs from the past 90 days. Models, symptoms, diagnosis, parts, time, total. Names omitted; the technical scenarios are typical of what we see weekly.
Bar. Friday, no ice, bar service stopped. Tech dispatched 25 minutes from West Hollywood branch. Diagnosed: scale buildup on evaporator. Last cleaning was 18 months ago, too long for a high-volume bar. Drained, applied Nu-Calgon cleaner, ran cleaning cycle, sanitized, replaced water filter (Pentair Everpure 4FC-S due for replacement). Production restored. Total: $120 plus $280 cleaning service plus $160 filter = $560. Bar continued service after a 90-minute repair window. Owner committed to a quarterly cleaning schedule going forward.
Restaurant. Temp climbing in machine, ice production at 50% capacity. Diagnosed: refrigerant slow leak at the evaporator brazed joint. EPA 608 leak repair: pumped down, brazed the joint, evacuated to 500 microns, recharged R-404A. Tested production rate over 6 hours, restored to 95% nameplate. Total: $120 plus $480 refrigerant plus $720 labor plus leak detection = $1,420.
Hospital cafeteria. Control board displaying error code F2 (water inlet valve fault). Diagnosed: water inlet valve diaphragm degraded (10-year typical life). Replaced inlet valve (Scotsman OEM via Ali Group network). Cleared error code, restarted machine, monitored harvest cycles. Total: $120 plus $380 part plus 1.5 hours = $620.
Sushi restaurant. Auger noise plus flake production reduced to slush. Diagnosed: auger gear reducer wear (typical 6 to 9 year life on heavy-use flake machines). Replaced gear reducer assembly. Flake production restored. Total: $120 plus $580 part plus 2.5 hours = $920.
Hotel. Ice button not dispensing despite ice in bin. Diagnosed: vend actuator mechanism worn (heavy hospitality use, 200+ vends per day). Replaced actuator, cleaned dispenser chute, tested 20+ cycles. Total: $120 plus $290 part plus 1 hour = $470.
Scope
We service:
We don't do: ice bin replacement only (we replace bins as part of service, but bin-only sales are equipment dealer territory); liquid nitrogen ice or dry ice operations (different equipment category entirely). Carbonated beverage syrup and CO2 lines on combination units we service too.
Pricing
Diagnostic is $120 (commercial tier), waived with the repair. No emergency surcharge: same flat $120. When a Hollywood bar manager or Long Beach restaurant operator searches commercial ice machine repair near me, that $120 is the all-in dispatch fee — no inflated Saturday rate, no per-mile fuel charge. OEM parts on critical components (water inlet valves, harvest sensors, condenser fan motors, control boards) sourced through brand authorized distribution.
| Service | What to Expect |
|---|---|
| Diagnostic visit | $120, waived with repair |
| Standard cleaning service (single machine) | $200 to $300 |
| Quarterly cleaning contract (annual, single machine) | $720 to $1,200 (4× per year) |
| Water filter replacement | $80 to $180 |
| Water inlet valve | $260 to $420 |
| Hot gas valve (harvest cycle) | $340 to $540 |
| Harvest sensor | $200 to $340 |
| Bin sensor | $180 to $280 |
| Condenser fan motor (air-cooled) | $300 to $520 |
| Auger motor / gear reducer (flake/nugget) | $580 to $880 |
| Refrigerant leak repair plus recharge | $700 to $1,500 |
| Control board replacement | $480 to $820 |
| Compressor replacement (cube undercounter) | $1,400 to $2,200 |
| Compressor replacement (modular cube) | $1,800 to $2,800 |
| Evaporator replacement (typical neglected scale damage) | $1,500 to $3,000 |
| Multi-component repair | $900 to $2,400 |
| Warranty on all repairs | 90 days parts and labor |
Cost of cleaning neglect: $200 to $300 cleaning vs $1,500 to $3,000 evaporator replacement when scale destroys the evaporator at year 3 to 5. Cleaning is mathematically dominant economic strategy. We say so honestly.
Brands we service
Major commercial ice machine brands in order of LA market presence:
Japanese (Hoshizaki Corporation, Toyoake Japan, founded 1947). Dominant US ice machine market. KM-Edge cube series, F-Series flake/nugget, dispensers. Hoshizaki America HQ Peachtree City, Georgia. See Hoshizaki ice machine repair.
Welbilt brand. Indigo NXT cube series (IY large, IB mid, ID compact), R-Series nugget. Industry workhorse with sophisticated diagnostic system. See Manitowoc ice machine repair.
Ali Group brand. Prodigy ELITE cube series (C-series sized by lb production), Brilliance nugget series. EnergyStar focus, post-2020 R-290 transition. See Scotsman ice machine repair.
Ali Group brand (sister to Scotsman). ICE series cube machines. Mid-tier value positioning.
Easton, Pennsylvania manufacturer. Specializes in healthcare ice machines, dispensers, and chewable nugget ice. Common in hospitals and medical facilities.
Marmon Foodservice Technologies (Berkshire Hathaway). Beverage dispensers plus ice combination units. Common in quick-service restaurants and hospitality.
Erie, Pennsylvania. Premium gourmet cube machines for premium bars and cocktail programs.
We carry common parts for the top 4 brands on the van. Parts for the rest ship 2 to 7 days through our distributor network.
Brand Guides
Where we service ice machines
Our techs repair commercial ice machines in Los Angeles, Orange, Ventura, Santa Barbara, San Bernardino, Riverside, and San Diego counties, same-day when a technician is available. The $120 commercial diagnostic is waived with the repair. Technicians are out Monday to Saturday, 8 AM to 6 PM, and the phone is answered 24/7.
Why us for ice machines
Sister sub-services: cube ice repair, flake ice repair, nugget ice repair, dispenser repair, scheduled cleaning service. Sub-service brand detail: Hoshizaki, Manitowoc, Scotsman. Brand guides: Scotsman, Hoshizaki, Manitowoc.
A real job from our service records, named with the business owner’s permission.
Our job photoSeptember 2026
ProblemThe ice machine had stopped working.
What we didOur technician traced the fault to the wire harness and repaired it on site — no parts needed.
✓ Repaired

August 2026
ProblemThe commercial ice machine had stopped working.
What we didOur technician cleaned the condenser coil and replaced the water level sensor.
✓ Repaired
FAQ
Scale buildup on the evaporator. About 50% of 'no ice' calls resolve with cleaning service ($200 to $300) rather than parts replacement. Other common causes: water inlet valve, refrigerant low (leak), water filter clogged. We diagnose the actual cause before quoting parts.
2 to 4 times per year is industry standard. More for high-volume operations (busy bars, hotels, hospitals). More for hard water areas. Less for low-volume installations with good water filtration. Cleaning is preventive: neglect leads to scale-destroyed evaporators ($1,500 to $3,000 replacement) instead of routine cleaning ($200 to $300).
Yes. These four brands cover roughly 85% of our ice machine service calls. Common parts (water inlet valves, harvest sensors, condenser fan motors, control boards) on the van for these brands. Follett, Cornelius, Kold-Draft also serviced.
Almost always water filter expired. Filter replacement is $80 to $180. If filter is current, possibility of biological growth (yeast, mold, bacteria) requiring full cleaning service. Health priority: discard ice and address the cause before serving customers.
EPA 608 Universal is federal certification required for handling refrigerant in stationary equipment. R-290 (propane hydrocarbon refrigerant) requires additional certification because it's flammable and uses different safety procedures. Many appliance shops don't carry 608, which makes their commercial ice machine work illegal. We have both certifications.
Yes. Annual contracts include 4 cleanings, scheduled water filter replacements, and preventive water inlet valve inspection. Rates lower per-cleaning than one-off service. Multi-machine accounts get volume rates.
Phones answered 24/7. Dispatch scheduling 8 AM to 6 PM Mon-Sat for technician arrival across LA, Beverly Hills, West Hollywood, Hollywood, Santa Monica, Culver City, Pasadena, and Long Beach. Saturday visits, yes. Sunday visits are by arrangement, and there are no night or evening visits: a call that comes in after 6 PM is booked into the next available slot, and urgent jobs go to the front of the queue. No emergency surcharge — operators searching commercial ice machine repair near me get the same $120 flat diagnostic.
Many LA municipalities and LADWP increasingly restrict water-cooled commercial ice machines due to water waste regulations. If your system is water-cooled and due for major service, conversion to air-cooled may be required by code. We assess on-site and explain options. Air-cooled conversion runs $1,800 to $3,500 typical depending on machine and venue ventilation.
Cleaning, by a wide margin, which is exactly why our techs push preventive service. A standard cleaning runs $200 to $300. Skipping it lets LADWP hard-water scale insulate the evaporator until it fails entirely, and an evaporator replacement runs $1,500 to $3,000, on top of the lost production while the machine is down. Commercial ice machines need 2 to 4 cleanings a year, more for high-volume bars, hotels, and hospitals. Cleaning is the mathematically dominant strategy and prevents most of the 'no ice' emergency calls we get. Same Day Appliance Repair, $120 commercial diagnostic, waived with repair.
Phones are answered 24/7, and we schedule same-day dispatch 8 AM to 6 PM Monday through Saturday across LA, Beverly Hills, West Hollywood, Hollywood, Santa Monica, Culver City, Pasadena, and Long Beach. A call that comes in after 6 PM is booked into the next available slot, Sunday by arrangement, and urgent jobs go to the front of the queue. There's no emergency surcharge, the diagnostic is the same flat $120, waived with the repair. Same Day Appliance Repair, $120 commercial diagnostic, waived with repair.
Slush, slushie, margarita, and frozen carbonated beverage machines are a different animal from ice machines, different drive and seal systems, but the same sealed-refrigeration diagnostics underneath. Our techs service those too: commercial slush & frozen beverage machine repair (Bunn, Taylor, Ugolini, Elmeco, FBD, Donper). Brand detail: Bunn slushie machine repair.
Searching commercial ice machine repair near me from a Beverly Hills hotel kitchen or DTLA restaurant at midnight? Hoshizaki + Manitowoc + Scotsman specialists. EPA 608 + R-290 certified. Same-day across LA, OC, Ventura. BHGS #A49573.